Spiral Reamer,Diamond Spiral Flute Reamer,Carbide Spiral Flute Reamer,Carbide Spiral Reamer Supal(changzhou)Precision Tools Co.,Ltd , https://www.endmillpro.com
First, what is the finger board?
Fingerboard, also known as Glulam, is made by splicing multiple pieces of wood, and the upper and lower parts are no longer glued and clamped. Because the vertical boards use a saw-tooth-like interface, similar to the two-handed fingers, they are called finger-joints. There is no need to paste splints on the upper and lower finger joints, the amount of glue is greatly reduced, the environmental protection of the plates is very good, and the Millennium Boat Fingerboard can basically reach the E0 level. This is one of the reasons why everyone likes this kind of plate. Millennium boat fingerboard is often used in furniture, cabinets, wardrobes and other excellent materials.
Fingerboard size specifications:
The specifications of the artificial plate are generally: 2440mm (length) x 1220mm (width) x thickness. Fingerboard thickness is generally 9mm, 12mm, 14mm, 15mm, 16mm, 18mm, etc. The thickest is 25mm.
Second, finger board to do the advantages of furniture:
1, Millennium boat refers to the fingerboard is made from short pieces of solid wood processing, still retains the characteristics of natural wood, fingerboard than solid wood panels affordable, affordable prices can meet people's demand for solid wood.
2. The fingerboard does not require high processing equipment and is easy to process. The nail holding force is also very good. The Millennium Boat Fingerboard is made of large-diameter logs. The board core has good hardness and is not easily deformed.
3, refers to the glue board with less place, with less plastic, so the environmental protection is very good, basically can reach E0 level.
4, Millennium boat finger board flat surface, strong and easy processing, not easily deformed, high strength, in terms of tensile and compressive strength are better than solid wood, even in the material quality is better than solid wood. Therefore, glulam can be used instead of solid wood in the respective fields.
Third, the disadvantages of fingerboards as furniture
1. The furniture made by the fingerboard is actually not a solid wood furniture with a real traditional structure but a modern panel furniture. Does not have the durability of traditional solid wood furniture;
2. Fingerboards are also divided into two sections: knotted and non-segmented. There are sections that are blinking, sections that are not blinking, and that are more beautiful; in addition, some fingerboards may exhibit color differences of different wood color plates;
3, Fingerboard retains good moisture permeability of solid wood, used to do furniture should avoid the kitchen and other wet environments, often need to brush paint treatment, on the one hand is to prevent the greenhouse change caused by the deformation of the plate affect the use of furniture, on the other hand to prevent Oxidation of the sheet retains a natural and beautiful wood color.
Fourth, finger board how to buy:
1. Fingerboard is made by splicing solid wood short strips. The bigger the strips, the better.
2. The biggest defect of the fingerboard is that it is easily deformed, resulting in deformation due to changes in the internal stress during the dry shrinkage and swelling. Therefore, it is very important for the finger-plate to have a moisture content standard, and the palm of the hand feels cold and chilly.
3, Fingerboard is also divided into two types of knots and no festivals, there is a section of the fingerboard eye blink, no finger joint plate does not exist blink, looks more beautiful.
4. In general, the bigger the annual rings of the slat core material of the fingerboard, the longer the tree age and the better the material.
5. The slats of the fingerboard are linked together by an adhesive. The glue strength of the plate has an important influence on the quality of the fingerboard. The splicing gap between the slats is small and there is no shortage of glue and degumming.
6. The fingerboard is divided into a bright tooth and a dark tooth, and the dark tooth is the best, because the bright tooth is more prone to unevenness after being painted. Of course, dark teeth are more difficult to process.
What is a fingerboard? Fingerboards do the advantages and disadvantages of furniture
In the renovation of new homes, furniture is an important part of it. Apart from some homeowners who will buy various types of furniture in the market, there are also many consumers who buy their own plates. The woodworking masters use wardrobes and other furniture to decorate the site. Common fingerboards, blockboards, paint-free boards, etc., from the following text, we can understand what is the fingerboard? Fingerboards do the advantages and disadvantages of furniture: