Universal Tensile Testing Machine A Universal Tensile Testing Machine, also known as a universal testing machine (UTM) or a materials testing machine, is a versatile instrument used to determine the mechanical properties of materials. It is commonly used in industries such as manufacturing, construction, and research laboratories. Servo Universal Test Machine,Tensile Strength Testing Machine,Universal Material Tensile Tester,Servo Universal Material Tensile Test Machine Dongguan Best Instrument Technology Co., Ltd , https://www.best-tester.com
The guide sign is used to indicate the realm, the direction and distance of the town, the entrance and exit of the highway, and the location of the famous location. The color is blue (green) + white. This type of sign is most useful when drivers come to unfamiliar roads. They can help drivers locate and identify directions.
The warning sign is a sign that warns vehicles and pedestrians to pay attention to the dangerous place. Its color is a yellow bottom + black border + black pattern, and the shape is an equilateral triangle with the top corner upward. The color of this type of sign is very conspicuous, and it is usually set in locations where traffic is more complicated or in suburban areas.
The role of the indication sign is to instruct the vehicle and the pedestrian to drive according to the specified direction and location. The color is a blue background and a white pattern, and the shape is divided into a circle, a rectangle and a square. Indicators are very common on the roads. They can guide the driver in the right direction and lane to avoid violations.
The ban sign is a sign that prohibits or restricts vehicles. Except for individual signs, most of them are white + red circle + pattern red bar + black pattern. The ban sign is often combined with an electronic camera. When drivers see such a sign, they do not want to make a fortune. They can only follow the signs.
The four types of traffic signs, such as road signs, warning signs, direction signs, and prohibition signs, are the most common types. Digesting these information is enough to cope with traffic signs on the road. Effective methods include adjusting the driving mentality, training driving skills, cultivating a sense of direction, etc. You may wish to try new drivers.
The machine applies tension, compression, bending, and shear forces to test the strength, elasticity, and durability of various materials such as metals, plastics, textiles, rubber, ceramics, and composites. It can measure parameters such as tensile strength, yield strength, elongation, modulus of elasticity, and fracture toughness.
A typical UTM consists of a load frame, grips or fixtures to hold the specimen, a load cell or force transducer to measure the applied force, and a displacement transducer to measure the deformation or displacement of the specimen. The machine is controlled by a computer or a control unit that allows the user to set the testing parameters and record the test data.
Road safety driving must be familiar with common traffic signs
The main role of the traffic sign is to regulate and direct traffic. In general, the amount of traffic signs will not be too large. The driver only needs to see the traffic signs in advance. However, there are still many violations of the traffic rules. Many newcomers do not say that they will not recognize the traffic signs, but because the driver is excited and nervous, even when he is new, his face is dazzled. When the traffic signs and markings were on, some of the traffic in the brain was immediately returned to the coach. Now a simple introduction will be given to everyone by traffic sign manufacturers: