Shangqiu Jinda Tools Co.,Ltd , https://www.jindameasur.com
The cable sled consists of three parts: a flat cable, a four-wheel trolley for carrying cables, and a guide rail. Flat cable uses non-flammable materials, can be used for indoor and outdoor and contact with oil pollution places, has a certain degree of weather resistance, and has a smaller radius of bending radius than the round cable, long life and other advantages.
The cable traverse track adopts cold-rolled steel plate once cold drawing to ensure the accuracy of the rail cross-section size, which replaces the unsafe of angle steel and other conductive methods. The weight is heavy, the indoor slide wire is dirty, and the outdoor ice causes the circuit to be short. Influencing the use of the shortcomings, but also has a unique domestic characteristics, the cable slide rail unit length 4 ~ 6m using coupler connector, can be extended to any length as needed.
The working principle of the cable slipper is shown in the engineering application diagram. (1) The beginning of the flat cable (connected to the field junction box) is fixed on the starter of the lead rolling and is appropriately spaced according to the allowable space for operation on the site (1-2.5 Mm) is fixed in turn on the four-wheel trolley carrying the cable, and the cable end (connection power supply) is set on the last trolley (truck). Through the reciprocating movement of the spring-pulled trolley on the cart, the dragging of the cable (length exceeding 20m, for example, the original traction rope should be taken into consideration so that the cable is free from pulling force), all the carts can be freely slid at any speed in the rolling path, and the rail is installed. Simple, no debugging, and no contact with the power supply, safe and reliable.
The cable sled was originally used for the cigarette production line designed by CMOAS in Italy for China, and is the key component provided by CMOAS. The DM-type material conveying device designed in CMOAS, the MCA series warehouse feeder, and the SAM series With regard to tobacco production equipment such as cabinets, SAD series wire storage cabinets, and FIFQ series stack storage type leaf storage cabinets, cable sleds are the most ideal products for signal transmission of power supply and electronic devices for mobile traveling motors and electrical appliances, and are not available for crane factories. The missing ancillary products can be used interchangeably with imported products, and can also be used as a spare part of the equipment. The cable slip line is widely applied to the power transmission and distribution system of all moving carriages such as railway crossings, ports, freight yards, and cigarette manufacturing.
Structure and working principle of cable slide guide rail
Cable slide guide rail structure features and working principle: