The working principle of a High Flow Peristaltic Pump like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the peristaltic pump hose. High Flow Peristaltic Pump,Additive Peristaltic Pump,Polishing Liquid Pumps,Intelligent Transfer Peristaltic Pump Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Reasons and solutions of insufficient flow of FYS type anticorrosive submerged pump
In daily use, FYS-type corrosion-resistant submerged pumps often encounter the problem of insufficient flow, which is also troublesome, then when the pump when such a failure, we all know the reason Where? And how to solve it? With such questions, followed by Xiaobian to introduce FYS-type corrosion-resistant liquid under the pump flow of the reasons and solutions. FYS-type corrosion-resistant liquid under the pump insufficient flow reasons and solutions A, FYS-type corrosion-resistant liquid under the pump flow inadequate reasons 1. Pump over-flow part of the other pieces of damage; 2. Pump speed is not enough; 3. Pump Suction or output port part of the blockage situation. Second, FYS-type corrosion-resistant liquid under the pump solution is insufficient 1. To replace the pump over-flow part of the other pieces; 2. Check the voltage, the motor is normal; 3. Quickly remove the blockage. The above is the FYS-type corrosion-resistant liquid under the pump the cause of the lack of flow and solutions, I hope we saw these contents, we can eliminate the heart of the pump due to insufficient flow generated troubles. Extended reading: China Construction Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Industry Exhibition Industry Interconnect (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http: //beng.liuti .cn / (Service Hotline:)