Powdered activated carbon particles to wear dust masks

Powdered activated carbon has a good application in handling sudden odor and industrial pollutants in water. When using powdered activated carbon, adsorption tests must be carried out based on the type and concentration of contaminants to be removed in order to determine the type of activated carbon and the amount of powdered carbon needed. Before adding the powdered activated carbon, it should be noted that the charcoal powder is first made into a uniform and even amount of water, and the longer the contact time is, the better the decontamination effect is. During the use of powdered activated carbon, attention should also be paid to the following safety issues: When the concentration of dust reaches a certain percentage, the explosion of a fire is likely to occur. Therefore, smoking, sparks, and open flame are prohibited in the operation room. Mixing with oxidants should be avoided. Powdered activated carbon particles are small. Light, dust should be taken into account when using, the operator must be equipped with dust masks to avoid inhalation of lungs.

Copyright Notice: This article is reproduced from online media and represents only the author's opinion. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.