Latex paint is a common type of architectural coating products, generally composed of emulsions, pigments, fillers, additives and water. Emulsion is the most important raw material affecting the performance of latex paints, usually synthetic resin emulsions. Compared with other coatings, the production process of latex paints is relatively complicated. The latex paint production process mainly has the following major steps: 1. Put water on; 2. Distributing the microbicide; 3. Put into a film forming aid; 4. Putting thickener; 5. Putting a pigment dispersant; 6. Putting antifoaming agent and wetting agent; 7. Putting in pigment and filler; 8. Putting the emulsion; 9, pH adjuster; 10. Put in other additives; 11. Place a water and/or thickener solution. Latex paint production process operation procedures: The water is first placed in a high-speed mixer, and a microbicide, a film-forming aid, a thickener, a pigment dispersant, an antifoaming agent, and a wetting agent are sequentially added at a low speed. After mixing uniformly, the pigment and filler are slowly sieved into the vortex stirred by the impeller. Shortly after the addition of the pigment filler, the abrasive material gradually thickened. At this time, the distance between the impeller and the bottom of the paint mixing bucket should be adjusted to make the vortex into a shallow basin. After the addition of the pigment filling, the impeller speed is increased (the linear speed of the wheel edge is about 1640 m/min). In order to prevent the temperature from rising too much, it should be stopped to cool down, and the pigment and filler adhered to the barrel edge should be scraped off during parking. The fineness of the blade is measured at any time, and when the fineness is qualified, the dispersion is completed. After the dispersion is completed, the emulsion, the pH adjuster are gradually added at a low speed, and other additives are added, and then the viscosity is adjusted with water and/or a thickener solution, and the discharge is sieved. Concerned about surprises Label: latex paint production process Previous: Daily maintenance tips for non-slip floor tiles Next: Fire window technical requirements
Eelectrician Tool Backpack is a type of backpack designed specifically for electricians to carry and organize their tools while on the job. These backpacks typically have a variety of compartments and pockets that are specifically designed to hold different types of tools, such as pliers, wire cutters, screwdrivers, and more. They may also have features such as padded straps and back panels for comfort during extended periods of wear, durable materials to withstand wear and tear, and waterproofing to protect the tools from moisture.
Some key features to look for in an electrician tool backpack include:
Organization: Look for a backpack with multiple compartments and pockets, and consider whether the layout will work well for the specific tools you need to carry.
Durability: The backpack should be made from sturdy materials that can withstand the weight of your tools and resist wear and tear.
Comfort: Look for a backpack with padded straps and a padded back panel for comfort during extended wear.
Weather resistance: If you work outdoors or in wet environments, consider a backpack that is waterproof or at least water-resistant to protect your tools from moisture.
Capacity: Consider the size of the backpack and whether it will comfortably hold all the tools you need to carry.
The best electrician tool backpack for you will depend on your specific needs and preferences, so be sure to do your research and read reviews from other electricians before making a purchase. Please contact us if you have any preference to tool backpack.
Electrician Tool Backpack,Tool Bag Engineer,Technician Tool Bag,Electrician Backpack ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.sjxiangletoolbag.com
