Temporary Fencing Cost,Canada Temporary Fence,Menards Temporary Fencing,Temporary Event Fencing Anping County Kairong Wire Mesh Products Co., Ltd. , https://www.krmeshfence.com
With the continuation of the use of time, the surface of the construction concrete curing agent will appear very good gloss, can effectively play a role in dust, hardening. However, a glossy surface does not mean that the ground will be slippery, and the friction coefficient is a good proof that the ground will not slip after the concrete curing agent is applied.
During normal use of the ground, frequent traffic will wear the ground and damage the concrete surface. Concrete floors treated with concrete seal hardeners will not wear out due to frequent use. Conversely, whether it is a rough broom or a calender in daily use, or in the cleanliness of the ground, can maintain the original rough surface of the concrete sealant floor surface.
The data obtained from the test is that the dry friction coefficient of ordinary concrete ground surface is 71 and the surface value of wetland is 47. The surface dry friction coefficient value of the concrete sealing curing agent was 86 and the wetland surface value was 69. Therefore, from the data, it can be seen that the floor surface using the concrete sealant curing agent is not only smoother than the ordinary concrete floor surface, but also the glossiness is improved, the friction coefficient is also improved, and there is no possibility of slippage.
Sealing curing agent, also known as concrete seal curing agent, seal curing agent is the latest generation of products developed by DBC Floor Company, also known as the penetration seal hardener. It is a liquid material that is colorless, transparent, easy to construct, non-toxic, non-flammable, and has strong penetration and can permanently seal concrete. The sealed curing agent penetrates into the concrete and chemically reacts with the chemical substances in the concrete to form a gel, shrinks the pores and cracks in the concrete, and makes the concrete a compact whole, thereby greatly improving the impermeability, wear resistance and freeze-thaw cycles of the concrete. , surface hardness and other performance indicators.
Our company always adhering to the modern business philosophy of “using the most professional people, doing the most professional things, specializing in thinking, professional execution, and doing professional thingsâ€, satisfying the majority with excellent quality and sincere service. Customers are constantly developing and changing specific needs. Our company specializes in producing seal curing agents. The company can design the most suitable and perfect ground engineering solutions according to the different needs of customers and the actual conditions of the construction site, and provide the most professional and authoritative technical support. The following takes everyone to understand the basic knowledge of the sealant curing agent:
Sealing curing agent is also known as concrete seal curing agent. Sealing curing agent is the latest generation product developed by DBC Flooring Co., Ltd., also known as penetrating seal hardener. It is a liquid material that is colorless, transparent, easy to construct, non-toxic, non-flammable, and has strong penetration and can permanently seal concrete. The sealed curing agent penetrates into the concrete and chemically reacts with the chemical substances in the concrete to form a gel, shrinks the pores and cracks in the concrete, and makes the concrete a compact whole, thereby greatly improving the impermeability, wear resistance and freeze-thaw cycles of the concrete. , surface hardness and other performance indicators. Concrete seal curing agent manufacturer Jin Zhu professional floor treatment expert
Does the bright surface of the concrete seal curing agent slip?
People often think that: The bright floor must be slippery, and the brighter floor will be slippery. From our professional judgment of whether the ground after the construction of the concrete seal curing agent is slippery than ordinary concrete ground, it is mainly determined by the friction coefficient. The method of measuring the coefficient of friction is to place the surface of the test on a new stone bottom device weighing 50 pounds. The detector is used to pull the device until it moves. The dynamometer requires the device to move from the test surface when the force is measured in pounds. The resulting data can be used to derive the friction coefficient of the ground from the formula. The smaller the coefficient of friction, the more slippery the ground is.