2. The chimney hole should seal the hole between the chimney and the glass or the wall must be sealed, otherwise not only the cold air and moisture can easily enter, but the burning exhaust gas may also be poured into the wind. 3. The valve is normally connected Check if the water, electricity, and gas pipelines are connected properly. Check for any abnormalities such as looseness or leakage. If any problems are solved in time. Decoration company heating heating boiler switch glass door Brass Flange Ball Valves,Brass Flanged Gate Valve,2 Brass Ball Valves,Brass Ball Valve 3/4 NINGBO RIDE SPORT EQUIPMENTS CO.,LTD. , https://www.assur-valve.com
Compared with centralized heating, independent heating has features such as independence, economy, and humanization, but at the same time, users must also take on more “responsibilityâ€. You must use your hands to enjoy comfort. However, in the face of the coming winter, many families are in an uproar, because they have never been exposed to independent heating, and they do not know how to use the “big thing†in front of them – an independent heating stove. According to DE, an independent heating expert, Zeng Jia introduced that the principle of independent household heating is very simple, and it is also safe to use. It has long been popular in foreign countries. However, there are many details in the heating process that must be taken care of. Otherwise, you may complain “not warm for three days. ", and find no reason. Whether central heating or household heating, system testing must be performed before use in order to eliminate the problem in the bud: 1. Adjust the chimney stack to properly install the chimney should be tilted down about 5 degrees, such as chimney level or tilt It will lead to backflow of rain or condensate into the boiler.
Heating to pay attention to the deflation Heating effect is good and bad with the radiator has a great relationship, if you do not plan to replace the heating this year, it must be carried out on the maintenance test to prevent "swimming." First of all, check whether the heating and piping of each group are connected properly and whether the valve switch is smooth. Secondly, vent the radiator and use a screwdriver to open the air release valve at the end of each group of heaters until it is clear and uninterrupted. The air release valve can be tightened. In order to ensure that the heat is evenly distributed, it is recommended that you do not place objects within 1-2 meters of the front of the radiator. If there are problems or hidden troubles in the above links, you should contact the property company quickly to help solve the problem.
Try burning and then put it off
If you pass the above two tests and there are no problems, you can press and burn the test. Under normal circumstances, through trial burns day and night, if there is no problem, heating can start smoothly. The process of trial burn is as follows: 1. Open the natural gas valve. 2. The four water pipes under the boiler are all open. 3. The resident who installed the boiler program controller should adjust the temperature of the controller above room temperature, otherwise the boiler will not work. 4. Turn on the fireplace start switch. 5. Check the water pressure and replenish water promptly. When the switch is just turned on, water pressure will be displayed on the wall display of the boiler. If the number is less than 1.0 bar, the water must be filled. Normally, the normal water pressure is between 1.2 bar and 1.5 bar. 6. Heating temperature is adjusted to "*" or 3 speed. 7. Check for water seepage at the connection of the water pipes below the boiler and other heater end connections. 8. Perform a further deflation of the radiator. If the heating is not hot locally or if the hum of water is heard, the gas inside is not discharged.
DIY: Do it yourself
On Tuesday, the city has begun a large-scale centralized heating, but many independent heating users also rely on the heating equipment that does not have enough sunlight to start their own. But after all, when winter is over, you have to prepare for the time when you have a "cold, frozen and frozen" time, so that you can have a comfortable temperature in the hut. Today, we asked experts to focus on educating readers who have never used a self-contained gas-fired wall-mounted heating stove, and you may find that there are many misunderstandings in operation! Do not forget to test before use