Rolling tool bag is a type of tool bag that features wheels and a retractable handle, allowing it to be easily transported over longer distances. They are typically made from durable materials such as heavy-duty nylon, canvas, or leather and feature reinforced handles for easy lifting.
Rolling tool bags come in a variety of sizes and styles, ranging from small totes to larger bags with multiple compartments. They may also have additional pockets and compartments for organizing smaller items such as screws, nails, and drill bits.
The benefits of a rolling tool bag include:
Portability: The wheels and retractable handle make it easy to transport tools and equipment over longer distances without the need for heavy lifting.
Versatility: Rolling tool bags can accommodate a variety of tools and equipment, making them a versatile option for different trades and applications.
Easy to organize: Some models feature additional pockets and compartments for organizing smaller items, making it easy to keep tools and equipment organized and easily accessible.
When choosing a rolling tool bag, it is important to consider the size and weight of your tools, as well as the overall durability and quality of the bag. Additionally, consider the size and quality of the wheels for smooth rolling over various surfaces.
After the drilling boring tool is selected and installed, and the workpiece is clamped and aligned on the rocker drilling machine, drilling can begin. Drilling and axle-like workpieces are the same as the outer circle of the car, and the roughing and finishing processes should be separated.
In terms of cutting amount determination and selection, since the workpiece condition of the drilling is worse than the outer circle of the vehicle, especially after the drilling tool is clamped, the hanging elongation of the drill rod is often larger than the overhang of the outer turning tool, and the rigidity ratio thereof is The outer turning tool is low and is more prone to vibration. Therefore, the feed rate and cutting speed during drilling are lower than when the outer turning is performed.
Blind hole drilling. The length of the drill is slightly longer than the diameter of the drilled hole, and the size of the drill should be smaller than the radius. When the hole is drilled, when drilling the hole, install the hole cutter according to the method shown in the figure. After several times of feeding, the bottom of the hole is leveled. When drilling the hole depth, the drill hole is horizontally oriented to the hole. The center exits and then exits the hole longitudinally. When adjusting the amount of back-feeding knife, it should be noted that the direction of the back-slurry of the slider of the skateboard dial during drilling is opposite to that of the outer circle.
Fine drilling allowance should be left for rough drilling. When the wall of the hole is thin, the workpiece should be relaxed before the fine drilling, and then gently clamped to prevent the workpiece from being deformed due to over-tightening. Drilling routes when drilling blind holes are advantageous for removing chips. The method of controlling the drilling speed is usually done by scribing the drill rod or using the dial on the slide box. When the tool is automatically moved, when the drilling depth is reached, the manual feed should be manually slowed to avoid damage to the drill.
Radial Drilling Machine Series http://YaoBiZuan/ 
Rolling Tool Bag,Rolling Tool Backpack,Rolling Toolbag,Rolling Backpack Tool Bag
ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.sjxiangletoolbag.com