Wall Engineering Acceptance Specification - Advanced Plastering Wall

>>> Links: Wall decoration method collection

This section is applicable to advanced plastering projects such as lime mortar, cement mortar, mixed mortar, polymer cement mortar, expanded perlite cement mortar, paper reinforcement, hemp tar and gypsum ash.
Number of inspections: Perceptual census, permissible deviations 20% of the total number of random inspections, column groups, in addition to vertical and horizontal inspection, the column by root inspection.
(1) Ensure that the project plastering basement project must meet the relevant provisions of this standard.
The positions of the columns in the column are correct, and the vertical and horizontal lines are on the same line.
Inspection methods: observation, ruler check.
(2) The plastering surface of the basic project shall meet the following requirements:
Qualified: The surface is smooth, clean, uniform in color, with no obvious moire; the line angle and gray line are straight and square.
Excellent: The surface is smooth, clean, uniform in color, free of streaks, straight and gray lines, square, clear and beautiful.
The plastering surfaces behind holes, slots, boxes and pipes shall comply with the following provisions:
Qualified: The dimensions are correct, the edges are neat, and the back of the pipe is smooth.
Excellent: The dimensions are correct, the edges are neat, smooth, and the square pipe is smooth and smooth behind the pipe.
The packing quality of the protection angle and the gap between the window frame and the wall should meet the following requirements:
Qualification: The material and height of the horn are in compliance with the current construction regulations and the surface is smooth. The gap between the door and window frame and the wall is densely packed.
Excellent: The material and height of the horn are in accordance with the provisions of the construction specification. The gap between the door and window frame and the wall is densely packed and the surface is smooth and smooth.
The quality of the slits (strips) should meet the following requirements:
Qualified: uniform width and depth, neat corners, horizontal and vertical.
Excellent: Width, depth, smooth, neat corners, horizontal and vertical.
Inspection methods: observation, hand touch, tap with a small hammer and check with a ruler.

Wall construction cement window

BBQ tool

Barbecue wire Grill Grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.

BBQ Grate,BBQ Mesh,BBQ Grill, grill grate,grill mesh

Shenzhen Lanejoy Technology Co.,LTD , https://www.wirefruitbasket.com