I don't know if you have encountered the situation that the toilet tank does not enter the water in your home life. Xiaobian has encountered it. It is really a headache to encounter the toilet tank without entering the water. It is very troublesome and inconvenient to flush the toilet every time the toilet is used up. Today, Xiaobian will analyze the reasons and solutions for the water in the toilet tank. 1. It may be that there is an inverted object like a water cup stuck in it, just move down and it will be fine. 2. Open the cover with the button and have a float inside to see if it is stuck. 3. Open the toilet lid and check if the float sinks to the bottom when the water tank is not water. If it is still at the top when it is not water, it means that the float ball is broken, and the sinker can not be lowered, so the water inlet is always closed, so there is no water. Check the other reasons, whether the triangle valve is open, remove the triangle, check whether the end of the wire connected with the wall is blocked by the raw material belt, and whether the open valve spool is opened and closed normally, the water hose Whether it is smooth, just a little something, you can just rule out the same. If it is normal, then you should consider the problem of the water pipe, whether it is welded during construction. 4. The situation with less water from the tap is a problem. There is also a filter inside the toilet hydrator. The filter screen is blocked by too much scale for a long time, so that the tap water can't enter. As long as you can remove the filter and clean it. 5. Close the valve on the hose that connects the water tank into the water, or spray it in a little while. Then flush the toilet and drain the water from the tank. 6. Clean the filter with a waste toothbrush or the like. It is better to have a scale cleaner. No problem is not big. I just use a scale remover and blisters for a while. It is especially clean. I can also pour some of this mixture into the water hydrator. The scale is removed. They are all cleaned. 7. Along the water inlet hose, look under the toilet, there is a hex nut to connect the hose and the water hydrator (a standing plastic tube) in the water tank, use a wrench to turn the nut down, and then along the nut Looking up, there may be a same position as the nut, the same rotation, the same function, and also screwed down. My home is plastic, I don't know anything else like this. After two steps, the water hydrator can be taken out from the inside of the toilet. 8. Remove the water hydrator and see that there is a small square column in the middle of the tube. Pull it out with a needle-nosed pliers. You can see that the square column and the strainer are integrated and come out together. The above is the reason and solution for the water in the toilet tank that the small series brings, and I hope that in the future, I can help you solve the problem that the toilet does not enter the water. Full Color Series-Color,Color Pvb Film Acoustic,Eva Film For Laminated Glass,Ethylene Vinyl Acetate Film HUAKAI FENGSHI TECHNOLOGY (CHONGQING) CO., LTD. , https://www.cqhkpvb.com