[China Aluminum Industry Network] 1. Easy to achieve automated production. Since the electrophoretic coating of aluminum profiles is performed in an electrophoresis bath, similar to the anodization and electrolytic coloring processes, the processing time is short, and there is an aluminum material wholesale market that can easily realize the assembly line operation of the entire process.
In order to isolate train noise and reduce the damage of noise to passengers, ICESUN Vacuum Glass LTD. has released a series of vacuum glass for vehicles, including Vacuum Glass For Cars, vacuum glass for train and Vacuum Glass For Ship . With the superior heat insulation ability, the central condensation temperature of tempered vacuum glass is reduced to below minus 50 degrees. Vacuum glass has obvious sound off effect on bus engine noise, train noise and aircraft noise. In addition, the use of safety Vacuum Glass For Transportation can make passengers fully feel the beautiful scenery along the way. Besides, Our High-tech Vacuum Glass technology has good performance of thermal insulation and improving the wind pressure resistance and strength, which is much better than ordinary glass and tempered Low-E insulating glass filled with argon. Therefore, our sound proof vacuum glass products are perfect for train windows, car windows, ship windows and other vehicle windows.
Vacuum Glass For Train,Glass For Train Door,Vacuum Composite Glass For Train,Vacuum Laminated Glass For Train ICESUN VACUUM GLASS LTD. , https://www.icesunvacuumglass.com
2. The film is uniform and dense. Due to the high throwing power of the electrophoretic coating of aluminum profiles, it is possible to obtain a uniform coating film for the shape of the complex shape and to control the film thickness by adjusting the amount of electricity.
3. The utilization rate of paint is high. Due to the low viscosity, the workpieces are carried less, and the electrophoresis workpieces can be washed with water. The utilization of the recovery device enables the electrophoretic coating to have a utilization rate of more than 95%.
4. Security and environmental protection. Because the electrophoretic coating is diluted with water, the solid content is low, and the solvent content is low, it is an environment-friendly paint, and the risk of fire is eliminated, and the health of the workers is also guaranteed.
5. The coating quality is good. Acrylic resin is cured with amino resin to ensure the high decoration and high corrosion resistance of the coating film. At the same time, because the resin is highly transparent, it effectively highlights the metal texture of the aluminum profile, and can be decorated with matt, sand, pearl, etc. as required. effect.
6. Compared with the conventional electrolytic coloring and sealing process, it has the advantages of time saving and labor saving. The electrophoretic coating film does not need to be sealed, and cracks and other defects caused by bad sealing holes are avoided.
7. The thickness of the coating film can be freely controlled, and both the 7μm and 12μm are normally controlled at home and abroad.
8. As the electrophoretic layer is transparent and bright, the processing of aluminum doors and windows therefore requires high quality aluminum ingots, smooth surface extrusion, less mechanical defects, strict management of the oxidation coloring process, because any minor defects and stains will be in the transparent paint Under the full exposure. 