Silicon carbide Abrasive Belt is a high-performance grinding tool, widely used for grinding and polishing of various materials. Its unique material and structure give it significant advantages in industrial processing, and it is an ideal choice for improving production efficiency and product quality. Silicon Carbide Abrasive Belt,Silicon Carbide Wide Abrasive Belt,Jumbo Roll Sanding Abrasive Belt,Wide Jumbo Roll Sanding Belt Foshan Nate Abrasive Science & Technology Co.,Ltd , https://www.nateabrasives.com
Product Features
1. High hardness and sharpness
Silicon carbide is a hard material second only to diamond, with strong cutting ability and wear resistance.
Sharp particles can quickly remove materials and improve processing efficiency.
2. Excellent heat resistance
It has good heat resistance and can still maintain stable grinding performance under high temperature environment, suitable for long-term continuous processing.
3. Wide range of grit size selection
It provides a variety of particle size options from coarse to fine, suitable for a variety of materials such as metal, wood, glass, ceramics, plastics, etc., and can be used for preliminary grinding, fine grinding and other different process links.
4. Excellent anti-blocking performance
Special coating treatment reduces the adhesion of dust and impurities, prolongs service life and improves grinding effect.
Application areas
1. Metal processing
Used to remove oxide layers, welds, burrs, suitable for surface treatment of stainless steel, carbon steel, aluminum alloy, etc.
2. Wood processing
Suitable for furniture manufacturing and wood product processing, quickly remove surface defects and improve finish.
3. Glass and ceramic processing
In the edge and surface grinding of glass and ceramics, it provides precise effects, improves transparency and finish.
4. Composite material processing
Used for the processing of composite materials, plastics and resins, providing efficient cutting and good surface effects.
Product specifications
Substrate type: J-wt soft cotton cloth, 100% Polyester Cloth, F-weight heavy duty latex paper.
Grit range: P24 to P1000.
Dimensions: Sanding belts of different lengths and widths can be customized to suit a variety of grinders and processing equipment.
Reasons for selection
Efficient production: High cutting performance and durability reduce replacement frequency and improve processing efficiency.
Excellent quality: Provide consistent grinding effect and surface finish to help improve product quality.
Economic benefits: Reduce material and labor costs, and bring higher economic benefits to enterprises.
Conclusion
Silicon carbide abrasive belts have become the preferred tool for improving processing efficiency and product quality with their excellent hardness, wear resistance and versatility. Whether in metal processing, wood processing, or polishing of glass and ceramics, silicon carbide abrasive belts can provide excellent solutions. Choose silicon carbide abrasive belts to make your products more competitive.
Test pump operation steps and application examples
Test pressure pump steps first step, test pressure pump pipe water. Install the pressure gauge, water valve and other accessories, open the exhaust valve to be tested pipeline, close the drain valve, through the nozzle into the clean water until the water is filled pipe and over a certain value of the water valve, close the exhaust valve , Stop filling. The second step, test pressure pump with oxygen connection. The oxygen bottle (bottle pressure greater than the test pressure) on the rubber band connected to the water pipe. The third step, the pressure test pump slowly boost. Slowly open the valve on the oxygen bottle, pay attention to observe the pressure gauge on the oxygen bottle, pressurized to a certain value, you should stop to check the pipeline, no problem, then continue to pressure, generally 2-3 points rose to test pressure. The fourth step, pressure test pump pressure check. For low-pressure heat pipe, pressure holding time to 5-10 minutes is appropriate in the test pressure to maintain the time, such as the pressure gauge pointer does not drop more than 0.02MPa, and no distortion of the visual pipe, that strength test pass. Final pressure test pump tightness test. The pressure dropped to the working pressure, a comprehensive inspection of the pipeline can be used 1.5g below the head hammer in the seam 1.5-20mm Department gently tapping, such as pressure gauge pointer does not drop, the pipe weld and flange connection Department did not find leakage, that can be considered tight test. Application of pressure test pump Test pressure pump in Xinyi Zhongli Road heat pipe renovation project, the method has been applied, Zhong Wu Road width 42cm, heat pipe ( 219) at a height below the road surface 3.5m across the clock After my road, rise on both sides of the road. After the installation of the pipeline, using the method of hydraulic pressure test, the test pressure of 0.9MPa, after the pressure reaches the test pressure 40 minutes, pressure gauge pointer no change.