First, high temperature baking room technical configuration table Lighting Pole,Lamp Pole,Solar Street Light Pole,Street Light Pole China Searun Solar Solution Co., Ltd. , https://www.srsolarlights.com
1. The outer dimension is 6500×2500×2500 (mm) (L×w×H). The inner dimension is 6350×2350×2350 (mm) (L×w×H).
2, the front door 2 fan size: 1000 × 2000mm (W × H) door frame special aluminum alloy production, the door edge is sealed with high temperature rubber strip.
3, wall wall panel using high temperature rock wool board T = 75mm wall color matching
4, heating system 1 set with 60 sets of infrared carbon fiber heating tube heating, each group 1000W. Maximum heat generation 6000000kcal/n temperature design 80° to 230°
5, top plate high temperature resistant rock wool board with T = 75mm press forming, top beam skeleton (4 × 8) mm national standard square tube
6, electronic control system paint, temperature control instrument, lighting switch, fault indicator, power switch, emergency stop switch, time-of-flight and other standard electronic control equipment.
7, voltage frequency 380V 50HZ
8, the total power of 60kw
9, the base high temperature rock wool board T = 75mm
Second, when we use the high temperature paint room http://, we should pay attention to its temperature standard, specifically the following five major standards:
1. The fan performs hot air circulation when the high temperature paint booth is opened. The baking temperature is normal temperature - 600 ° C, the temperature is adjustable, the time is adjustable (maximum 2 hours) and automatically controlled. The air circulation system consists of a complete set of units. The supporting fan has high power, high air volume and fast wind speed, which effectively ensures the smooth flow of indoor air and no traces of paint fog, which ensures the health of the operators and the effect of painting.
2. The electrical control system is mainly composed of electrical control cabinets and pipeline racks.
3. It can realize automatic control of power supply control, automatic temperature control and baking time of baking paint.
4. The electric control cabinet panel is equipped with current and voltage meter, liquid crystal temperature digital display instrument, temperature controller, high temperature paint time controller and fan, heater, lighting and other indicator buttons.
5. Electrical control equipment is interlocked.
The development of the current paint booth has given people unexpected results. High-temperature paint booths are generally used to spray paint on car furniture. Some people have whimsy, even in the high-temperature paint room to carry out crop planting, but also achieved the effect of increasing income. In the winter, technicians in a certain area started a crop planting experiment in a high-temperature paint booth that was idle in the village. The original intention was to make full use of the idle facilities.
The high temperature paint booth has been idle for a long time, and the technicians noticed this. The villagers who are busy in the high-temperature paint room said: "Growing often requires higher temperatures than the outside world, and the cost is on the one hand. This can be used effectively to save a large part." He said that the high-temperature paint room grows crops by The County Agriculture and Animal Husbandry Bureau is responsible for technical guidance. The technicians will come to the crops several times a week to understand the growth. It is unheard of to grow crops in high-temperature paint booths. The high-temperature paint booth was properly modified for crop planting, but the automatic humidification spray system was installed in the high-temperature paint booth, and the original structure of the high-temperature paint booth was not changed. 