Screw Locking Wire Thread Insert Threaded inserts have locking keys to hold them in place. These inserts are for metal applications; not recommended for cast iron or brittle material. Repair damaged threads with a positive mechanical lock, preventing rotational spinout from vibration or torque. Screw Locking Wire Thread Insert,Self-Locking Thread Insert,Thread Repair Insert,Self-Locking Thread Inserts Shenyang Liming Mechanical Component Factory , https://www.helisert.com
Ring pump pressure regulating hole What is the role?
The role of liquid ring pump pressure regulating hole is to prevent under-compression and over-compression, it must be set at the pressure regulating valve check valve, automatically locked when compression is insufficient, automatically open when over compression to avoid excessive power consumption. However, when the check valve design is not good or poor material lead to failure or damage to the check valve, the pressure regulator hole not only does not work, it will have adverse consequences. When the pump is working at high vacuum or extreme pressure, less suction gas will occur in the compression section compression is insufficient, the pressure of the liquid outlet will never shut off the pressure back to high-speed return hole, causing a great impact, resulting in serious hydraulic Losses, resulting in a sharp increase in power consumption, pumping speed also has a certain impact. When the inhalation of a lot of gas, and pressure regulating valve can not open the valve, it will cause over-compression, resulting in increased power consumption, but also affect the pumping speed.