2. When making a panel curtain box, first make a 7-shaped frame pinned to the top, and both sides should be sealed with wood panels. The vertical border under the application of a 20 * 18mm wooden bar reinforcement, nailing, to prevent deformation, such as the re-sealed nails decorated with water, do mixed water paint must ensure that the grass-roots surface smooth. 3. When the window cover is made of block board or density board, the base board should be fixed on the keel of the window frame base and then nailed. “Zi†shaped nails prevent the curling of the lines, the angle should be dense and smooth, the window cover The next mouth should use marble, so as to avoid deformation due to moisture. 4. After the door cover is made of wood, the frame shall be planed and straightened, then installed on the wall in assembly molding, covering the base board and veneer. Acceptance 1. The door pockets should be vertical, the veneer should be flat and square, and there must be no head and bell mouth. 2, wooden doors, window covers cut corners neat, tight seams, smooth surface, no planing, burrs. Three trees painted wooden door brand window marble wooden door room paint Led Panel Light,Round Square Panel Light,Recessed Panel Spot Lighting,Led Panel Light Dimmable Shenzhen You&My Electronic Technology Co., Ltd , https://www1.youmyledlight.com
New house and second-hand house acceptance method
Construction 1. Make curtains boxes according to requirements of rooms and drawings. If curtains are installed without curtains, attention should be paid to the distance between the opening of window frames and the thickness and length of curtain rods when installing curtain rods.