Heating cover construction and acceptance

1, heating cover construction content

The heating cover is a facility that conceals the heating and cooling fins. Heating is an essential heating facility for residential homes in vast areas of the northern part of the country. Because at this stage, the heating radiators in residential buildings do not meet the requirements for beautifying the environment in terms of style and color, therefore, in the home renovation, the heating treatment Is the most basic requirement. The most common method of processing is to make a heating cover, covert the heating radiator, and then decorate and decorate the heating cover to improve the decoration of the living room. Common heating covers are fixed and movable. The common shape of the heating cover has been provided in the first chapter for reference when decorating. The fixed heating cover is connected with the wall body, and the movable cover body is independent. In any form, it is required to ensure that the heat dissipation fins are well dissipated, the cover body is not deformed by heat, the surface is beautiful in shape and safe, and the inspection and maintenance of the heating and cooling are convenient. sheet.

2, heating cover construction specifications

(1) Stationary heating cover: Before installation, the wall and floor shall be used to ensure the position of the heating cover. The length of the heating cover shall be 100 mm longer than the heat dissipation fins. The height shall be below the window sill or level with the window sill. Should be more than 10 mm wider than the heating, radiator cover area should account for more than 80% of the heat sink area. In the wall surface and floor installation line, drill the lower wooden mold, and the mold should be treated with anti-corrosion. According to the size of the mounting line, the skeleton of the dragon is made and the skeleton of the wooden dragon is fixed on the wall and the ground with a round nail. The distance from the wall surface is less than 200 mm and the distance from the ground is less than 150 mm. The round nail should be nailed to the wooden mold. The frame of the heat shield should be planed and flat. The heating cover side panel can use pentalithic panels. The top should increase the suspension lining, trim panel with triple plastic sheet. Before the panel is installed, the latex should be brushed on the outside of the heating hood frame. After the facing panel is fixed on the wooden keel with the shooting nail, the panel should leave the position of the radiator cover, and the edge is flush with the frame. The top and sides of the front are covered with wood lines. Make a cooling cover frame, the frame should be planed, flat, size should be consistent with the frame on the keel, the side of the pressure line closed mouth, the frame can be modeled.

(2) The movable heating cover: Because it is easy to move, it can be used for maintenance work. The width is narrower than the fixed heating cover and it takes up less space. Therefore, it is more appropriate to install the heating cover alone on the wall instead of other Siamese furniture. When used. The movable heating cover shall be regarded as a furniture production. According to the length, width and height of the heat sink, the cover has a side plate and a heat-dissipating net on three sides, with a length of more than 100 mm, a height of more than 50 mm and a width of more than 15 mm. In the box, mount the cover directly on the heat sink.

3. Heating cover construction essentials

The construction of the heating cover shall be started after the indoor ceiling and the wall have been treated with the grass-roots level, and the primary wall shall be leveled. The wooden aggregates and decorative materials produced by the heating cover shall meet the standards of fine wood decoration, the materials shall have no defects, the moisture content shall be less than 10%, and the moisture content of the plywood shall be less than 8%. The keel should use red and pine wood. The skeleton of the heating cover must be opened, and the plum eye should be glued to the stick. The extrusion must be tight and the connection must be firm. The veneer should be processed to the correct size, the surface is smooth and smooth, the lines are smooth, the fitting is tight, there is no obvious stick, hanging glue, exposed nail cap and pollution and other defects. After the production of the heating cover woodwork is completed, the finish treatment shall be immediately carried out, and after the clean oil is applied again, other operations may be performed.

Construction Acceptance Heating Windows Furniture House Interior Decorating

Electroplated Diamond Products

Superabrasives are tools used in precision grinding,precision cutting,precision polishing and precision drilling,like flexible diamond abrasive.Superabrasive materials attach to a wheel,blade and drill to make Superabrasive grinding wheels,cutting balde and drilling bit.The reason some abrasives are Superabrasives is due to their extraordinary hardness,unparalleled performance,and longevity.
What are Superabrasives?
Abrasives that belong to the Superabrasive family includes,Industrial diamonds: an industrial diamond is a non-gem quality small diamond that is for abrasives,cutting,and drilling tools.
Cubic boron nitride (CBN): Usually called CBN it is the second hardest cutting tool material after a diamond.
Polycrystalline: Is an abrasive material that has a multiple collection of crystal grain structures with individual orientations
CVD Diamond: These are synthetic diamonds made by a process known as chemical vapor deposition.CVD diamonds grow from a hydrocarbon gas mixture. They are extremely hard,have a high thermal conductivity that is five times that of copper. They also have broadband optical transparency,are chemically inert,and only reach graphitization at very high temperatures.
Nanodiamonds: These tiny diamonds are the product of a controlled explosion. Sometimes called a detonation nanodiamond (DND) or an ultradispersed diamond,as this is how they form.
Industries That Use Superabrasives
A great number of industries use Superabrasive grinding wheels and the coated abrasives subsection of the abrasives industry continues to grow. Industries that are prime buyers of Superabrasive grinding wheels are,

diamond abrasive products,continental abrasives,Superabrasives Precsion Polishing,Superabrasive Grinding Wheels,Profiled Superabrasive Grinding Wheels,Flexible Diamond Abrasive

Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com