Granular wallpaper concept: On the basis of ordinary wallpapers, special techniques are adopted to naturally distribute different shapes of environmentally friendly particles on the surface of the wallpaper, breaking through the constraints of the limitations of wallpaper materials, and becoming a natural-style particle wallpaper. First, the wall surface should be flat, dry, clean, uniform color, and must be done leak, moisture, and water treatment, otherwise it will be due to the long-term moisture and the phenomenon of falling off. Second, must use high-quality special wallpaper powder, mortar, and according to the instructions on the deployment of the glue. The quality of rubber powder and glue will directly affect the construction quality and overall effect of wallpaper. 3. Do not "soak water" before applying paper, otherwise it will cause delamination of double paper and affect the fastness of wallpaper and wall paste. As long as the glue is evenly adjusted on the back of the wallpaper, be careful not to glue the surface of the wallpaper to the particle (because the surface of the particle wallpaper is not even, it is difficult to clean the glue in the particles). Then the glued wallpaper is folded and placed on the wall after being folded for 15 minutes. Gently brush the wallpaper with a brush or a soft cloth to remove air bubbles so that the wallpaper fits snugly against the wall. Fourth, special attention: particle wallpaper production process is different from ordinary rubber surface wallpaper, especially the surface particle shape is different, is a natural segmentation, the formation of particle material wallpaper natural texture style, resulting in a mosaic pattern wallpaper, in the construction There will be a slight misalignment in the seams, and the completion of the construction will not affect the overall pattern. 5. Use the same batch of wallpapers on the same wall surface. Before use, check whether there are color differences between the rolls. If there are color differences, do not cut them, and immediately deal with the suppliers and save all the labels for use. Wall construction wallpaper Low creep clay refractory bricks are made of selected high alumina clinker, mullite, combined with clay as the main raw materials, high pressure molding, high temperature sintering and become. The product has excellent high temperature physical properties and chemical corrosion resistance. According to the creep rate (0.2MPa, 1280 ℃, 25h) can be divided into ≤ 0.4%, 0.6%, 0.8% of the three series of low creep clay brick. Customized Low Creep Refractory Brick,Customized Low Creep Refractory Bricks,Customized R&D is Available Refractory Bricks Huixian Xinwei Refractories Co. , https://www.xinweirefractory.com