There will be updated standards for furniture health, and home safety will be more assured. The current standards are loose. Zhu Changling, chairman of the China Furniture Association, said that the new national standard is more scientific, rigorous, and has more diverse testing content, and more comprehensive protection for consumers. Last year, the Guangzhou Municipal Quality Supervision Bureau issued a furniture test report. The report shows that the quality of furniture in the market is still not optimistic, especially the problem of excessive formaldehyde emissions from panel furniture. Over-standard accounted for more than 30%. The analysis believes that the main reason for excessive formaldehyde is that manufacturers use substandard wood-based panels and inferior adhesives to reduce costs. According to the National Furniture Product Quality Supervision and Inspection Center, China's furniture products have rarely used solid wood, and most panel furniture uses fiberboard or particle board bonding. In this way, adhesives must be used for veneer and edge banding. The adhesive is the source of formaldehyde. Not to mention that there are so many furniture formaldehyde in the market that exceed the standard. In fact, compared with the relevant standards in Europe and the United States, China's testing standards for formaldehyde emissions from furniture are relatively loose: China still follows the standards issued in 2001 for the detection of formaldehyde content in furniture. In the standard, the regulation of formaldehyde emission is no more than 1.5mg / L. The detection method is difficult to protect the rights. The detection method is also very different between China and the United States. China uses the "dryer method" for the detection of furniture products, and the "environmental test warehouse method" is used in the United States. The difference between the two is that the American method Without damaging the entire furniture product, put the furniture in an environmental chamber to collect gas. The detection process does not damage the structure of the furniture. The biggest advantage is that the detection process simulates the environment of the furniture, which is more in line with the actual situation; and dry The instrument method is to cut the furniture into small pieces for detection, which is a destructive test. It not only destroys the furniture, but also differs from the actual situation of furniture use. Different detection methods make consumers more inconvenient in defending their rights. According to media reports, a complaint about furniture not being environmentally friendly in May last year reflected the helplessness of consumers under the old standard. When Mr. Guo tested the empty room, the indoor air quality reached the standard. After putting in the furniture, the indoor air quality did not meet the standard. He reported the situation to the furniture dealer. The other party said that all the furniture met the standard. If Mr. Guo believes that the standard was not met, he can send the furniture to the relevant department for destructive testing according to the current national standard. If it does not meet the standard, the dealer is willing to bear the corresponding responsibility. Otherwise, Mr. Guo shall bear. This statement made Mr. Guo very hesitant. According to the explanation of the experts, the home he bought may reach the national standard because of proportional sampling and detection, but the amount of wood used is too large, and the superposition of harmful substances caused the indoor air quality to fail to meet the standard, thus destroying The results of the sex test are not necessarily in his favor. Mr. Guo has to bear the risk that the furniture is damaged but no compensation can be obtained. There will be three breakthroughs in the new standard and the implementation of the new national standard will better protect the safety of consumers' homes. According to Zhu Changling, the revised new furniture testing standard will reflect its advantages in three aspects. Prosperity 1: Overall inspection, the results are more reliable. The new standard can more accurately reflect the overall actual release of toxic and hazardous substances from the inspectors. This method will help consumers control the environmental protection coefficient of furniture more scientifically and rigorously. Advantage 2: Non-destructive testing with low testing risk. The new climate chamber detection method is much more advanced than the current method, which makes up for the loopholes of the current detection method. The entire piece of furniture is placed in a specific environment for detection. The furniture itself will not be damaged to any degree. Good thing, if the test result is not satisfactory, you can ask the merchant to ask for compensation. If the test result meets the standard, it will be a test fee, and you can also buy a peace of mind. Advantage 3: Environmentally friendly furniture, renamed to be true. The climate box test can include all parts of the furniture into the test range, detect the overall environmental protection status, and also determine the release amount of harmful substances such as VOC of the furniture while detecting formaldehyde. The test results are more comprehensive and reliable. Automatic Motion Sensor Led Lamp,Automatic Led Light Sensor,Automatic Motion Sensor Led Light,Led Automatic Lights Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com