[China Aluminum Network] Appearance expert: National Chemical Building Materials Quality Supervision and Inspection Center Director Zhao Xinjian Product Profile Aluminum doors and windows made of extruded aluminum are called aluminum alloy doors and windows. Aluminum alloy doors and windows have become one of the major building doors and windows products in China due to its light weight, high strength, good performance, strong decoration, economical durability, color diversification, non-pollution, and recycling, and are widely used in high-grade public buildings. General residential and industrial plants. Aluminum alloy windows can be divided into ordinary aluminum alloy windows and energy-saving aluminum alloy windows. Energy-saving aluminum alloy windows are made of heat-insulating aluminum alloy profiles and energy-saving glass (insulating glass, LOW-E glass, heat-absorbing glass, coated glass, vacuum glass, etc.).
The working principle of a Medium Flow Peristaltic Pumpis like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the Peristaltic Pump hose. Medium Flow Peristaltic Pump,Constant Flow Peristaltic Pump,Intelligent Accuracy Pump,24V Peristaltic Pump Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com
Key indicators 1. Profile wall thickness. According to the national standard GB/T8478-2008 "aluminum alloy doors and windows" requirements, the main section of the main bearing section of the substrate is smaller than the measured actual wall thickness should not be less than 1.4mm. At present, the aluminum alloy profiles for doors and windows produced on the market are mainly used for the production of aluminum alloy profiles. The measured substrate thickness is less than 1.4 mm. If the wall thickness is too small, it will directly affect the service life of the window and wind pressure resistance performance.
2. Airtight performance. The air-tight performance index of the energy-saving aluminum alloy window is: air per unit length q1 ≤ 1.5 (m3/(m·h)); air per unit area q2 ≤ 4.5 (m3/(m2·h)). Due to the poor quality of the selected sealing strips and the impact of the production level, the airtight properties of many aluminum alloy windows do not meet the requirements of energy-saving windows.
3. Heat transfer coefficient (insulation performance). The heat transfer coefficient is one of the energy-saving indexes that directly evaluates aluminum alloy windows. The standard requirement is K≤3.0W/(m2·K).
4. Glass properties (visible light transmittance, shading coefficient, dew point). It is also one of the energy-saving indexes for evaluating aluminum alloy windows. According to the requirements of current energy-saving windows, the shading coefficient is ≤ 0.55, the visible light transmittance is ≥ 0.4, and the dew point is ≤ -40°C.
Purchase Tips 1. Look at the production quality. The decorative surface of doors and windows should not have obvious damage. It means that the protective film on the surface of windows and doors should not have scratches and scratches. The coloring of adjacent members on doors and windows should not have a significant color difference. There should be no aluminum chips, burrs, oil spots or other stains on the surface of doors and windows, and there should be no spilled adhesive at the assembly joints.
2. Look at the material. Whether it is a broken bridge thermal insulation aluminum profile, the main profile wall thickness should be greater than 1.4mm; the same aluminum alloy profile color should be consistent, such as obvious color difference, that is not suitable to buy; check the surface of aluminum alloy profile, there should be no depression or bulging; aluminum Alloy doors and windows to avoid the purchase of surface bubbles (white spots) and ash (black spots), as well as cracks, burrs, peeling and other obvious defects in the profile; oxide film thickness should reach 10 microns, optional surface light on the profile Scratch it to see if the oxide film on the surface can be wiped off.
3. Look at the assembly quality. Repeatedly switch several times to see if the switching force is too heavy; whether the sealing strip is firm; whether the hardware assembly is complete; whether the sash window frame overlap quantity meets the requirements (the standard requirement is that the leveling window is not less than 6mm, and the sliding window is not more than 8mm).
4. Look at the glass. Whether it is hollow glass, there is no coating.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.