3 Overall processing of the impeller Previous page
What make ceramic mid-edge hand wash basins different from thin-edge Basin is the thickness as 35mm. Good flatness with shining glaze also make mid-edge basins enjoy good-reputation in our oversea markets. More style and design, thanks to check in the products` details.
GUANGDONG ZHIJIE (JETMAN as brand name) SANITARY WARE CO., LTD. is located in Chaozhou city, ceramic capital of China. Established in 1999, JETMAN has grown to be a large-scale enterprise specializing in producing ceramic basins.
Equipped with most advanced casting equipment and computerized kiln, Jetman is able to meet daily capacity of 3,000pcs. By installing most advanced production equipment, JETMAN has introduced more than 300 designs into its range, including Thin-edge basin, Mid-edge basin, Cabinet Basin, laundry basin, Art Basin, Counter basin and Color Basin. Thanks to its own R&D department, Jetman has an edge over others in developing exclusive designs upon customer drawings. Options of purchasing either AB grade or A grade are available.
810*460*150 Japanese glaze available mid edge basin Sanitary Imported Wash Basin,Ceramic Bathroom Sinks Kitchen Porcelain,Ceramic Rectangle Hand Wash Basin,Western Bathroom Sink GUANGDONG ZHIJIE SANITARY WARE CO., LTD. , https://www.zhijiesanitary.com
This chapter is based on UG's free-form surface modeling function for 3D solid modeling of rotors. Firstly, the original data file of the blade is processed to establish the spline curve of the blade profile, and the spatial profile of the blade is constructed to more accurately reflect the curved shape of the blade, which is beneficial to the actual processing of the blade. 
The impeller machining should be completed with a 5-axis NC plus center. The 5 coordinates refer to the addition of 2 rotation axes (A, B or A, C or B, C) based on the 3 translational axes and 5 axes can be linked. . Thanks to the 2 axes of rotation, the 5-axis machine has a wide range of motion axis configurations. When the modeling is completed, the machining module in the UG software can automatically generate the CNC plus T command that the CNC machine can accept. The traditional method of impeller machining is to use different blanks for the blade and the contour, and the T is formed by welding the blade to the contour. This method is not only time consuming and laborious, but also various performances of the impeller are difficult to guarantee.
The UG system comes with three types of five-axis machine tools. In this paper, the rotary/swing type machine tool is used for virtual simulation processing. The swing axis of the oscillating head is the B axis, and the rotary axis of the turret is the C axis. The machine tool components and tool components are transferred into the machine navigator, and the impeller parts are placed on the turntable for machining simulation. The impeller uses a 5-axis CNC machine tool plus T. Because the blade is very twisted, the flow path is relatively narrow, and the tool should be reasonably oscillated on the blade and in the flow path to prevent the impeller from being overcut and to obtain a smooth blade. It can be seen from the three-dimensional model of the impeller of Fig. 6 that when the surface of the Jiading blade is heavy, the tool axis must swing between two adjacent blades and cannot collide with the blade, that is, the blade is the boundary of the flow path processing. condition. In UG, a tool axis iterative method, Interpolated M Axis, is proposed, which can control the tool axis by defining the vector direction at a specified point to produce a complete high quality impeller.
According to the blade profile characteristics, according to the way the tool is in contact with the curved surface, the five-axis CNC milling blade profile can be divided into two types: "line contact" (side edge milling) and "point contact". However, for side-edge milling, the entire side of the tool is in contact with the blade, which has a great influence on the springback of the thin blade. Therefore, side milling of such blades is only an approximate processing method. For point contact, this method has some unavoidable disadvantages: for blades with a higher degree of bending, because the space distance of the blades is relatively close, the interference between the adjacent blades during processing is difficult to avoid; "Line processing" produces a small rebound when processing thin blades, so when adding T-edge fillets, the "point processing" method is adopted. Therefore, in the overall processing of the impeller, the processing method is to combine "point processing" with "line processing".
4 Conclusion
The practice shows that the CAD/CAM technology is applied to the five-dimensional NC machine tool, and the three-dimensional solid modeling of the rotor is carried out for the structural characteristics of the impeller parts, which is more conducive to the visual observation of the designed workpiece, which greatly reduces the actual production and processing. Waste, reducing design cycles and reducing production costs. 
Digital modeling and overall machining of impellers (3)
2.3 summary summary