Led Trunking System Accessories
Here are mainly some LED Linear Trunking
System accessories, such as Connector, Suspension Accessory, and so on.
This LED Trunking System is a system that
can meet many of your lighting needs. It can also be freely combined with
various connectors, so there will be more accessories. But you don`t have to
worry at all, we will help you with the accessories you need. Because not all
accessories are necessary, as long as you tell your needs, we will help you
match them, you don`t need to worry. The installation manual also clearly
describes and demonstrates all the steps, and we will always solve your
problems for you.
There are mainly 3 Wire trunking linear
lights, 5 Wire Trunking Linear Lights, 7 Wire Trunking Linear Lights, 8 Wire trunking
linear lights, and up to 11 Wire trunking linear lights. The LED Linear
Trunking System is suitable for many places, such as supermarkets. Exhibitions,
shops, etc. It can also be hoisted with a single lamp, which is very flexible.
You can choose the one you need by yourself, or send a message to me and I can
recommend a product that suits you.
Feed In Box,Node Connector,Female Conncetor,Wire Connector,Feed In Conncetor,Power Supply Cable,End Cap,Blank Cover,Suspension Accessory,Mounting Clip SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com
D-SMC's first pilot production line has been put into operation.
After the SMC cutter in the D-SMC system cuts the material, the material is automatically fed into the press mold. The D-SMC line has a width of 800 to 1600 mm and a design capacity of 500-1000 kg/h. A single main line can be connected to several presses to fully feed these presses. The effective production width of the production line can be adjusted online.
The glass fiber content of this D-SMC can reach 28% to 38%. With the addition of hollow glass microspheres, the Dieffenbacher plant can even produce low-density SMC. The main control system of the production line is connected with the direct batching station, cutting station, automatic feeding device and press, and can set and change the formulation of different products within a few minutes. In order to ensure quality, all process parameters are monitored and recorded. 
Dieffenbacher introduces D-SMC composite technology
In the traditional SMC (single-sheet molding compound) technology, the production of semi-finished SMCs and the molding of semi-finished products are separated in space and time. Therefore, high logistics and processing costs are required to ensure stable semi-finished products. And the final product quality. The direct SMC technology (abbreviated as D-SMC) developed by Dieffenbacher GmbH of Germany eliminated the packaging, storage and logistics steps of SMC semi-finished products. With direct technology, it is possible to continuously produce molding compounds, which are then pressed into products in direct subsequent extrusion-compression molding processes. This innovative one-step process eliminates the cooking time that lasts for several days and is a great advantage both in terms of time and cost. This process reduces the time it takes for raw materials to be converted into products and saves logistics costs. The elimination of semi-finished intermediate processes also allows simultaneous adjustment of various components of the formulation (eg fillers and reinforcing fibers) during the process.