CAM has always been the most reliable and reliable workpiece partner for the processing industry. It not only provides reliable toolpaths, but also allows NC programmers to design the most efficient machining program in their minds... Coal Activated Carbon For Water Purification
Use: Usedin the purification of drinking water, in-depth treatment of water water etc.
Spec.:
CAM has always been the most reliable and reliable workpiece partner for the processing industry. It not only provides a reliable tool path, but also allows NC programmers to design the most efficient machining program in their mind. According to CIMdata's survey last year, EDSUG is regarded as the most powerful competitor among all CAM software suppliers.
UGCAM has the following characteristics:
Provide a reliable and accurate tool path.
Can be processed directly on surfaces and solids.
A good user interface allows the user to customize the user interface according to the needs of the work, which not only improves the work efficiency, but also makes good use of and saves the company's Konw-how.
A variety of processing methods are available to facilitate NC programmers to design a variety of efficient tool paths.
Provide complete tool library and processing parameter library management functions, so that new personnel can make full use of the experience of experienced personnel to design excellent tool paths.
Provides general-purpose post-processing functions to generate NC programs for each NC machine.
UGCAM includes two-axis to five-axis milling, ó bed milling, wire cutting, large tool magazine management, solid analog cutting and general-purpose post-processors. In this paper, the author will introduce the application of the medium-high cutting of the boring milling in the mold processing.
Contour cutting
Contour cutting is used in mold processing and is mainly used under processing conditions that require uniform tool force. For example, in rough machining, the tool is generally subjected to a large force, so the contour cutting can limit the force of the tool to a range by controlling the cutting depth. In addition, in the middle machining or finishing, if the machining part is too steep, too deep, and it is necessary to lengthen the lengthening of the blade, since the tool is too long when the yaw is too large, it is often necessary to use a constant cutting method to reduce the tool. Force. The most popular high-speed cutting machine is also the user of contour cutting.
UG's contour cutting function not only provides a variety of processing methods, but also allows the tool to make the fastest and best cutting under uniform force conditions throughout the machining process. The following are the characteristics of UG contour cutting.
There is no limit to the use of the tool
The NC programmer can freely select tools such as flat knives, ball knives, round nose knives, and T-knife for contour cutting according to the performance of the machine tool, the material of the blank, the clamping method and the cutting efficiency. In terms of calculation, UG uses the selected tool, and the layer is calculated along the machining plane, so it can produce an accurate tool path.
Automatically detect the undercut area (undercut)
UG automatically detects undercut areas within the machining range and automatically calculates the best tool path. When milling with a T-knife, if the shank does not interfere with the machined surface, UG will do the most complete cutting possible. Since the cutting is performed with a flat knife, in the undercut area, the tool path generated by the UG is based on the principle that the entire tool does not touch the machined surface.
Provide a variety of tool path types
UG contour cutting is used for double cutting, one-way cutting, spiral cutting, edge cutting and multi-layer edge cutting. Among them, multi-layer edge cutting provides a high efficiency raw billet processing path, which is also a good choice for deep and steep processing surface finishing.
High-speed cutting machines can take advantage of this feature to create a good machining path. A ramp path is generated at each depth, the first pass is 3 mm from the finished face, and the second pass is 1 mm from the finished face.
Produce a uniform machining path for the tool
When the mold is being machined, the NC programmer or the machine operator often avoids the excessive force of the tool in the NC program, causing serious loss of the tool, reducing the feed rate of the overall path and affecting the entire machining. effectiveness. UG provides a variety of feed rate setting methods to solve this problem. The user can set the feed rate of the tool's local force (such as the first cutting, the tool path reciprocating, the tool path angle)
Set different depths of cut in different height areas
In order to leave a uniform billet after processing, no unnecessary processing time is required. The UG provides the user with different depths of cut in different height regions depending on the shape characteristics of the workpiece. When doing multi-layer machining, we set a larger cutting depth in the steep region and a smaller cutting depth in the gentle region.
With the concept of processing materials and finished products
The processing material and the operation of the finished product allow the user to conveniently perform the calculation of contour roughing and finishing without modifying the CAD model. It is very convenient for the NC program of the mold electrode and slider.
With tolerance cutting function
The CAD data received by the mold industry is often the IGES file provided upstream. Therefore, there is often a gap and overlap between the curved surfaces of the CAD model for machining. UG provides tolerance cutting. The gaps and overlap between the surfaces can be automatically processed within the tolerance range set by the user, resulting in a good tool path.
Different processing allowances can be set on individual machining surfaces
In the mold design, due to the specification of the finished geometric shape, it is often necessary to define different meat thicknesses, mold faces, broken faces and general finished faces. In order for the NC programmer to set the NC program on a single CAD model, UG allows the NC designer to set different reservations (positive and negative) on the individual machining surfaces to improve the design efficiency of the NC program.
Provide a variety of in/out knife methods
UG contour cutting provides a variety of in/out retracting methods such as straight lines, broken lines, and arcs to meet the needs of actual machining. The user can also set different pre-drilling positions and drilling depths in different depth areas or machining areas. UG can also automatically determine the pre-drilling or diagonal feeding according to the machining geometry and tool definition during the infeed to meet the actual machining requirements.
The above information is published by Suzhou Shuohao Hardware Tools ()
Http://news.chinawj.com.cn Submission:
DX-3060
DX-3070
DX-3080
DX-4060
DX-4070
Coal Activated Carbon For Water Purification
Coal Activated Carbon For Water Purification,Coal Columnar Activated Carbon For Water Purification,Activated Carbon For Water Purification,Activated Carbon For Industrial Water Purification
SHIZUISHAN ZhongShi activated carbon co,.ltd , http://www.zscarbonchina.com