The profiling lathe uses the master to control the trajectory of the tool to achieve correct machin

Nine, F group (spindle, bearing and related off-the-shelf) oil 1. China has developed a product cla

Our factory produces JNP type condensate automatic pump. The pump body (Fig. 1) has tapped pipe thr

We used the revolutionary top on the CW6163A lathe. When working on a 0.6t heavy spindle, the machi

1. The oil dynamic and static pressure bearing of the oil supply device must rely on the external o

First, the symptoms of phytotoxicity 1. Spot: This phytotoxicity is mainly manifested on the l

The optical autocollimator and the photoelectric autocollimator combined with the mirror enable mul

When milling the spline shaft, we require the full length to be milled once. Because the journals a

Model NO.: BS-7015

Chain drive cleaning machine, the water storage tank is located on the ground, the water from the w

Mild steel (20 or A3) is a material with low hardness (strength) and high viscosity. Therefore, its

Model NO.: DG-7000