The main structure of the glass shutter is composed of a strip-shaped glass blade, a frame, a blade clamp and a glass installation material. It is to install several same strip-shaped glass blades in parallel on the frame at the same angle. So, what are the characteristics of glass blinds? How to install glass blinds? Let's take a look together with the editor! What are the characteristics of glass blinds 1. Due to its special structure, the glass shutters can adjust the shutters to an appropriate angle, so that they will not be affected by strong external winds, and can also ensure normal indoor ventilation. When large area ventilation is needed, the blinds can also be adjusted to a certain position to make the indoor air more fresh, and the cleaning of the glass blinds is also simple and convenient. 2. The glass blinds are relatively cheap to make and easy to install, and they are also very beautiful in appearance. They can be composed of glass blades of various colors or processing techniques, and have good decorative effects, so they are very popular. 3. The glass shutters are wind-oriented, and the opening angle of the shutters can be adjusted at any time, so that the indoors can maintain proper ventilation at any time and will not be affected by the outside world. 4. Because the glass shutter has a worm gear and worm control mechanism, the blade can be adjusted to any angle at any time. In this way, the wind direction can be adjusted and the air volume can be controlled, which can meet different ventilation needs, effectively change the indoor air, and increase the content of indoor negative oxygen ions. 5. As long as the glass shutters fix the blades on the frame, do not make extra grooves or notches. How to install glass blinds 1. Measure the frame size a. Before installation, measure the size of the outer frame so that the installed glass shutters can be used normally. When measuring, the width should be measured in order from left to right, and the width of the upper, middle, and lower of the window must also be measured. These data can get the appropriate width of the outer frame. b. Next, measure the height of the window from top to bottom, and then measure the maximum size of the left, center, and right of the window, so that the appropriate height of the outer frame can be obtained. 2. Measure the inner frame size a. The method of measuring the size of the inner frame is the same as the method of measuring the size of the outer frame. b. It is only necessary to ensure that the depth of the window is enough to allow the glass shutters to move freely. Different glass shutters are installed with different window depth requirements. c. If the glass shutters are flat or fixed, a depth of 8 cm is required. d. When installing the sliding window, not only the width of the blade but also the number of layers of the installed product must be considered. e. If it is a two-layer push-pull, it must ensure that the depth of the blade movement is 15cm; if it is a single fan, its depth needs 10cm; if it is folded and installed, 10cm depth should be reserved. Summary of the article: The above is the editor's explanation of what are the characteristics of glass shutters and how to install glass shutters. If you want to know more related content, you can follow us on this website for consultation, and there will be more exciting content in the future. What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :. Oak Flooring,Oak Engineered Wooden Flooring,Oak Wood Floor,Engineered Flooring Jiangsu Zhenrui Furniture Material Co., Ltd. , https://www.zrfloors.com
