Monel 400 is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity. The compositional range for Monel 400 is provided in the table below. Element Content Cu Fe Mn Typical properties of Monel 400 are covered in the following table. Property Metric Imperial Density 8.8 g/cm3 0.318lb/in3 Melting point 1350°C 2460°F Co-Efficient of Expansion 13.9µm/m.°C 7.7x10-6 in/in.°F Modulus of rigidity Modulus of elasticity 105-120 kN/mm2 15230-17405 ksi Condition of Supply Heat Treatment (After Forming) Annealed/Spring Temper Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool. Condition Approx Tensile Strength Approx Service Temp. Annealed 400 - 600 N/mm2 58 - 87 ksi -200 to +230°C -330 to +445°F Spring Temper 850 - 1050 N/mm2 123 - 152 ksi -200 to +230°C -330 to +445°F Monel 400 is covered by the following standard: Equivalent materials to Monel 400 are: Monel 400 typically finds application in:  Stock Form Specification Supply Form Others Sheet Thickness:0.40-4.75mm,General Width:1000,1219,1500mm Whole Coil or piece of it Cold Annealed,Surface 2B,2E Plate Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) Whole Coil or piece of it Single hot rolling,Solid solution annealed state,Surface 1D Belt Thickness:0.10-3.0mm,Width:50-500mm Whole Coil or Specified size Cold Annealed,Surface 2B,2E Bar & Rod Rolled barΦ5-45mm,Length≤1500mm Polished Bar(circle,Square) Solution annealing,descaling Forged barΦ26-245mm,Length≤4000mm Weld tube Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm Base on your requirement Use for PHE Seamless Tube Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm Base on your requirement Use for PHE Wire Outer diameterΦ0.1-13mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy Forged piece roundness and square alloy Base on your requirement Steel, Alloy Flangs All kinds of Flangs Base on your requirement Steel, Alloy Welding Material Coil wire Φ0.90mm/1.2mm/1.6mm Base on your requirement Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm Welding rodΦ2.4mm/3.2mm/4.0mm Tube Elbow, three links, four links, different diameter size Base on your requirement Ni & Ni alloy, Ti & Ti alloy Explosive bonded laminate Raw Sheet Thickness≥2mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy Name: Denny Cheng Direct line: 021-67897611  Weifang Meltway Co., Ltd. , http://www.wfsnowmelting.comIntroduction
Chemical Composition of Monel 400
Ni
63 % min
28 - 34 %
2.5 %Â max
2 %Â max
Typical Properties of Monel 400
(20-100°C)
(70-212°F)
65.3 kN/mm2
9471 ksi
Properties of Supplied Materials and Heat Treated Materials
Relevant Standards
Equivalent Materials
Applications of Monel 400
4. Contact us
N04400 Monel 400 Ni Cu Alloy Pipe
Model NO.: Monel 400
Surface Treatment: Black/Polish/Black
Sample: N04400 Monel 400 Ni Cu Alloy Pipe
Custom Sample: 5-7 Days
Certificate: ISO
Shipping Port: Shanghai
MOQ: 500kg
Trademark: Tisco/Baosteel
Transport Package: Good Quality & Fumigated Wooden Box
Specification: Dia 16 25 30 40mm * 6000mm length
Origin: China
HS Code: 7222300000
N04400 Monel 400 Ni Cu Alloy Pipe
1. Product descroption