IP65 led solar street light is brightly lit all year round, guaranteeing rainy days.
The control box is made of stainless steel, which is beautiful and durable; the maintenance-free lead-acid battery and the charge and discharge controller are placed in the control box. This system adopts valve-regulated sealed lead-acid battery. Due to its low maintenance cost, it is also called "maintenance-free battery", which is conducive to reducing system maintenance cost; the design of the charge and discharge controller takes into account complete functions (with light control, time control, protection, over-discharge protection, reverse connection protection, etc.) and cost control to achieve high cost performance.
Ip65 Led Solar Street Light,Solar Street Light Too Bright,Waterproof Solar Street Light Solar,Waterproof Solar Street Light WOSEN LIGHTING TECHNOLOGY LIMITED , https://www.wosenled.com
LED lamps are energy-saving and have high luminous efficiency, and the unit W can produce 80LM or even higher luminous flux.
Good color rendering, pure white light, all visible light.
Another most important point is that it can be driven by DC, which is especially important for solar energy, because the electricity generated by solar energy is also DC, which can save the cost and energy loss of the inverter.
Waterproof solar street light use sunlight as energy, charge during the day and use at night. No complicated and expensive plumbing is required. The layout of the lamps can be adjusted arbitrarily. Safe, energy-saving and pollution-free.
The system consists of solar cell assembly (including bracket), LED lamp head, control box (with controller and battery) and light pole; basic composition
The waterproof solar street light solar is mainly composed of solar cell components (including brackets), LED lamp head, control box (with controller, battery) and light pole; the windproof design is very beneficial; the LED lamp head light source adopts a single high-power LED (30W-100W) as the The light source adopts a unique multi-chip integrated single-module light source design, and adopts imported high-brightness chips.
Jet Edge, United States Introduces Modular Waterjet Pump
Jet Edge, a U.S. manufacturer of jet thrusters, has introduced the iP36-50 Modular Jet Propulsion Booster Pump. Thanks to this portable, 2500-bar, 50-horsepower water-jet propulsion pump, which is modular in design, it can be installed in tight spaces such as small aisles, ship's nacelles and ballast tanks. The Jet Edge iP36-50 modular water jet booster pump produces up to 1.8 gpm (6.8 L / m) of 2500 bar UHP water for precision cutting, cleaning and surface finishing. The pump is equipped with three modules with lugs. These modules can be stacked for operational and storage savings. The pump's hydraulic modules include electric motors, hydraulic pumps, hydraulic oil supplies, plate heat exchangers and related components to provide hydraulic boost for operation. The hydraulic module also has the ability to adjust the hydraulically-controlled extra-high pressure. The water module of the pump includes intensifiers, attenuators, drain valves, water filters and components for generating ultra-high pressure water. The electrical module includes the electrical components that operate the motor and booster. These modules are connected by hydraulic hoses and cables to separate the modules 3 m apart from each other.