Introduction: The plastic mold of the water channel plate is a mold for making cement precast blocks. The main raw materials are two kinds of PE and ABS raw materials. Through the injection molding machine heat extrusion molding. The plastic mold of the square drain plate must be coated with waste lubricating oil on the surface of the mold before use. The advantages are as follows: 1. It can play a role in protecting the plastic mold and enable the mold to be used for a longer time. 2. Good demoulding of the cement prefabricated block after molding, high production rate of the cement prefabricated block, reducing waste and cost, saving time and completing the project on schedule. Furniture Hardware,Wardrobe Drawer Door,Hardware Accessories Metal,Furniture Hardware Kitchen Cabinet ChongQing Troya Hardware Manufacture Co., Ltd , https://www.cqtroya.com
Put the mixed cement mortar into the plastic mold of the square water canal plate, place it on the vibration platform, compact the cement mortar, remove it in a flat place, and pour out the cement block when it is basically dry, and maintain it. Then clean the plastic mold and recycle it.