How to install hardware ware accessories and how to install sanitary ware accessories

Hardware ware accessories include soap boxes, towel racks, mugs, etc., which come in a wide variety of styles and styles. The following are the most common installation considerations for several sanitary wares:

1. Handle installation: The handle is set to facilitate the opening of the door or the drawer. Therefore, the first consideration when installing the handle should be whether it is convenient for people to open. In addition, the aesthetics can not be ignored, so that the handles of the same cabinet are consistent. Screw installation can not leave the rest of the plate outside, one is not good enough, and the second is easy to scratch people. This requires the selection of screws to match the thickness of the plate. The hole is also drilled, depending on the diameter of the screw.

2, the installation of the door hinge: the ordinary door can be fixed with two 100 mm hinges. If the door is heavy or the shape is strange, you need three hinges, or choose to install two longer than the general hinge. 25 mm hinge.

3. Installation of the lock: When installing the door lock, pay attention to the distance between the handle and the ground between 0.9 meters and 1 meter. The installation sequence is to first secure the lock body and the lock tongue. The tongue plate should be flush with the door edge. Make sure that the door can be tightly locked. Then install the lock plate so that it is flush with the edge of the door cover.

Editor in charge: Xu Yuehua