How to choose different gas alarm gas detectors according to different gases

According to the characteristics of the gas sensor, the sensors selected on various gas alarms are very particular. Because of the inability to make quantitative measurements, semiconductor sensors are mostly used in home alarms and spot-type alcohol detectors, which is more in line with the fact that such alarms only require qualitative measurements and lower price requirements.
According to the characteristics of the gas sensor, the sensors selected on various gas alarms are very particular. Because of the inability to make quantitative measurements, semiconductor sensors are mostly used in home alarms and spot-type alcohol detectors, which is more in line with the fact that such alarms only require qualitative measurements and lower price requirements.

Industrial alarms use catalytic combustion sensors and electrochemical sensors because they require quantitative measurements. However, semiconductor sensors were used in the early days, but nowadays, because of the high requirements, almost no manufacturers have used semiconductor sensors. Industrial gas alarms can be classified into point gas detectors and portable gas detectors in terms of usage. Considering the price factor, electrochemical sensors are generally only used in the case of quantitative measurement of toxic gases. For the occasion of the explosion measurement, the catalytic combustion sensor is generally used because of the low requirements.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Non-pressurized Solar Water Heater is a cost-effective system for residential hot water application. this system is designed according to thermosiphon principle and operating with proportion difference between cold and hot water. The water heated by Vacuum Tubes is held in the stainless steel storage tank where the insulation preserves the heat.

 

The thermosiphon solar water heater uses the sun to heat the working fluid (mostly water) in the vacuum tubes. The Solar Collector absorbs solar radiation, and converts the sunlight to heat and transfer it to the water. The heated water naturally rises through the solar collector into the water tank where the cooler water at the bottom of the tank is forced out and descends to the bottom of the collector (thermosiphon circulation). The circulation will be interrupted when there is no solar radiation.


Advantages and benefits
- Cost effective solar water heating solution
- Long operating life time over 10 years

Low cost in maintenance and repair requirements.

Short amortization rate

Economic customized solar water heating solution

 

Performance characteristics
- Higher energy yield and low heat loss due to the high vacuum of the evacuated tubes and PU insulation harmless to ozonosphere
- High-quality stainless steel in the inner tank to continuously maintain a good water quality.

Stainless steel inner and outer tank, highest water tank quality for coastal areas

Non-Pressurized Solar Water Heater

Solar Panel Heater,Non Pressurized Solar Water Heater,Non Pressure Type Water Heater,Solar Water Heater 300L

Linuo Ritter International Co.,Ltd , https://www.lnrtsolarenergy.com