PP (Polypropylene) Biaxial Geogrid Composite With Nonwoven Geotextile: Ultimate tensile strengths from 10kN/m to 50kN/m . Flexurally stiff biaxial monolithic and integrally formed geogrid constructed of Polypropylene by a unique punching and drawing process comosite with needle punched geotextile is manufactured using short synthetic fabric by welding .
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.
Composite PP Biaxial Geogrid With Nonwoven Geotextile, Extruded PP Biaxial Geogrid welded with nonwoven geotextile, BX Geogrid With Nonwoven Geotextile By Welding Feicheng Lianyi Engineering Plastics Co., Ltd , https://www.lianyigeosynthetics.com
This device is easy to use that it can operate as long as there is pressure water. It can also used with hydrant system that to connect the outlet of the hydrant. The foam extinguishing system is used to the liquid combustibles fire and insoluble and uncharged solid combustibles fire, for the charged solid and gas combustibles fire, there are dry powder extinguisher available in this system.
Range of Application:
1.    Highway tunnel, railway tunnel.
2.    Chemical factory workshop, storeroom, garage, hangar.
3.    Marine, wharf
4.    Other crowded entertainment venues and public place.
Technical parameters:
Model
Foam Tank
Capacity (L)Flow Range
(L/S)Spray DIST
(m)Inlet Size
Working PressureÂ
Range (MPa)Expansion
Ration
PSG 30
30
0.56~0.68
≥6
DN25
0.6~0.8
≥4
PSG 50
50
Notes: we make available customized design for our clients
The PSG series Outside foam hydrant cabinet is mainly consist of cabinet, fire hose reel, foam concentrate tank, proportioner, foam gun and dry powder extinguisher. It can either apply in foam extinguishing system or water spray extinguishing system. Close the foam valve and put out the fire with water when applied as water spray extinguishing system.
This device is easy to use that it can operate as long as there is pressure water. It can also used with hydrant system that to connect the outlet of the hydrant. The foam extinguishing system is used to the liquid combustibles fire and insoluble and uncharged solid combustibles fire, for the charged solid and gas combustibles fire, there are dry powder extinguisher available in this system.
Range of Application:
1.    Highway tunnel, railway tunnel.
2.    Chemical factory workshop, storeroom, garage, hangar.
3.    Marine, wharf
4.    Other crowded entertainment venues and public place.
Technical parameters:
Model
Foam Tank
Capacity (L)Flow Range
(L/S)Spray DIST
(m)Inlet Size
Working PressureÂ
Range (MPa)Expansion
Ration
PSG 30
30
0.56~0.68
≥6
DN25
0.6~0.8
≥4
PSG 50
50
Notes: we make available customized design for our clients
Fire Cabinet Foam Hydrant Cabinet
Model NO.: PSG
Size: 500*330*1200
Working Pressrue: 0.6~0.8MPa
Trademark: GAN
Origin: Shenzhen, China
Model NO.: PSG
Size: 500*330*1200
Working Pressrue: 0.6~0.8MPa
Trademark: GAN
Origin: Shenzhen, China
The PSG series Outside foam hydrant cabinet is mainly consist of cabinet, fire hose reel, foam concentrate tank, proportioner, foam gun and dry powder extinguisher. It can either apply in foam extinguishing system or water spray extinguishing system. Close the foam valve and put out the fire with water when applied as water spray extinguishing system.