Solid wood floor is the ground decoration material after wood is dried, machined, and the surface has been cured by paint lacquer. It has natural and natural patterns, mild materials, comfortable foot feeling and safe use. It is an ideal material for floor decoration in bedrooms, living rooms, and study rooms. The decorative style of solid wood is back to nature, and the texture is natural. In the case of a decline in the forest coverage rate, today's environmental protection is strongly promoted. Solid wood flooring is even more precious. How to buy solid wood flooring: 1, measure the moisture content of the floor According to national standards, the moisture content of wooden floors is 8%-13%. In fact, our country has a vast territory and different regions have different moisture content requirements. In the north of China, the floor moisture content is 12%, and the floor moisture content in the southern region should also be controlled within 14%. Distributors of general wooden floors should have a water content meter. If they are not, they do not pay attention to the moisture content. At the time of purchase, the moisture content of the wooden floor selected in the exhibition hall shall be measured first, and then the moisture content of the wooden flooring of the same species and the same specifications of the unopened packaging shall be measured. If the difference is ±2%, the moisture content may be considered as qualified. 2. Observe the accuracy of wooden floor After unpacking the wooden floor, 10 or so free hand-assembled units can be taken out. Observing the mouthpieces of the enterprises and assembling the gaps, the height difference between adjacent boards can be obtained. 3, check the defects of the substrate First check whether the same species, whether it is chaotic, whether the floor is dead, live, cracking, decay, bacteria and other defects. As for the color difference of the floor, since the wooden floor is a natural wood product, there are objectively chromatic aberrations and non-uniform phenomena, which cannot be avoided. And the feeling of returning to nature after paving the solid wood floor is in its natural color and pattern. If excessive pursuit of the floor is no color difference, it is unreasonable, as long as it can be adjusted slightly when paving. 4, select the board surface, paint quality The key to look at the finish is the film finish, no bubbles, paint leakage, and abrasion resistance. 5, identify wood species At present, the names of tree species on the market are very confusing. Due to the different growth environments of the wood, the materials of the same tree species are slightly different due to the origin, and the raw material prices are not the same. However, it is not the imported material that is better than the main material of the country. There are many kinds of trees in our country. With abundant resources, tree species in many regions are both good and the price is lower than that of similar imports. Some manufacturers promote the sale of wood with a variety of names that do not meet the science of wood, such as: cherry wood, rosewood, gold does not change, jade sandalwood and other names; what is more, low-grade high-grade wood, Consumers must not be confused by the name and make clear materials so as not to be fooled. When buying wooden floors, it is best to buy brands with good reputation and high reputation. In addition to quality assurance, the products usually have a certain warranty period, and warping, deformation, cracking and other problems occur during the warranty period. Manufacturers responsible for repair, change, can remove the worries of consumers. 6, determine the appropriate length, width Solid wood flooring is not the longer and the wider the better, it is recommended to choose the short length of the floor, not easy to deformation; length, width of the wood floor is relatively easy to deform. 7, decided to lay the construction unit The length of the floor life, in addition to the quality of the floor itself, the paving part is very important, so it is recommended that consumers buy which one of the floor to lay, in order to avoid the production companies and decoration companies to push each other responsibility. Solid wood floor maintenance: 1. Use a semi-dry mop when cleaning. If the air in the home is dry, the mop may be wet or put a pot of water on the heater or humidified by a humidifier. 2, after laying, waxing in time. In the usual use process, wax every 3 months. In fact, it does not fight, but often waxing, can maintain the floor finish, extend the life of solid wood flooring. 3, try to avoid contact with a large amount of water on the wooden floor; avoid using acidic, alkaline liquid wipe, so as not to damage the finish of the floor surface paint. 4, to avoid sharp objects scratch the ground, do not throw the cigarette on the floor or directly placed too hot things, try to avoid dragging heavy furniture. 5. When the floor is in use, if individual shells are found to have shelled or fallen off, the floor should be taken in time, old glue and ash should be removed, and new glue should be applied to compaction. Waxing once a month is also the best method of maintenance, but wipe off the moisture and stains before waxing. Del floor three trees lacquer decoration heating humidifier furniture decoration living room decoration style study furniture The price of steel structure building is favorable, and the safety is guaranteed! Steel Structure Building,Steel Frame Warehouse,Workshop Steel Building,Steel Structure Warehouse Building Henan Jinming Metal Material Co., Ltd. , https://www.jinminghouse.com
In recent years, steel structure buildings are still very popular, and can be divided into Industrial Steel Buildings and Agricultural Steel Buildings. Industry is mostly used for Steel Structure Workshop Warehouse, and agriculture is mostly used for cowsheds and stables.
Moreover, the construction efficiency of this type of building is high, and different designs can also be carried out, so as long as it can cooperate with regular manufacturers, customized processing buildings are also guaranteed. And from the price point of view, its cost performance is high, and the safety is also guaranteed.
sturdiness
Many people may worry that steel structure buildings are not as strong as traditional buildings, but this is not the case. Because it is made of heavy-duty steel, it has a strong load-bearing capacity and its stability is also guaranteed. It can withstand typhoons, earthquakes, etc., and its steel properties are unique, so it is also guaranteed to be used in harsh environments.
fire effect
Because steel itself is a non-combustible material, and the outer layer has fire-resistant coating and anti-rust coating, and many buildings directly use sandwich panels, so its fire-proof, moisture-proof, and sound-proof effects are also good. of.
waterproof and insect-proof
Steel structure buildings can be effectively waterproof, and the surface of the steel is also galvanized, so the corrosion resistance is also guaranteed. And it also has a good insect-proof effect, so you don't have to worry about being eaten by insects later.
long-term use
Such buildings can be used for a long time, but it is also important to choose light decoration for the interior as much as possible to reduce the overall load bearing of the building. Moreover, the hardness of steel is strong, and it is not easy to deform. It has a long service life and is also good in terms of cost performance.
Environmental performance
In fact, all materials of the steel structure can be recycled and reused, which can reduce the waste of energy and also avoid the generation of construction waste. Therefore, relatively speaking, this kind of building has strong environmental protection performance, and this kind of building will be chosen on many construction sites.
And now many manufacturers can also provide customized processing services, so that it is convenient to customize steel structure buildings, and fast construction can be completed in a short period of time, so that construction costs can also be saved a lot. Therefore, from the perspective of long-term use and cost performance, such buildings are indeed worth choosing.