Cr20al5 Alloy Resistance Electric Heating Wire

/ May 22, 2024

Model NO.: 0cr25al5
Width: 30-200mm
Resisivity at 20 Oc: 1.42+-0.07 Ohm mm2/M
Trademark: ualloy
Transport Package: Woden Pallet
Specification: ISO9001, ISO14001
Origin: China
HS Code: 72209000
Model NO.: 0cr25al5
Width: 30-200mm
Resisivity at 20 Oc: 1.42+-0.07 Ohm mm2/M
Trademark: ualloy
Transport Package: Woden Pallet
Specification: ISO9001, ISO14001
Origin: China
HS Code: 72209000
0cr21al6nb FeCrAl Heat Resistant tapes

1. Description
With the characteristics of high resistance, low coefficient of electric resistance, High operating temperature, good corrosion resistance under high temperature, It is widely used in industrial electric furnace, household electrical appliance and Far infrared ray device.

2. Specification
Wire:
Diameter: 0.15mm-8.0mm
Strip:
Thickness: 0.6mm-3.0mm
Width: 5mm-250mm

Cr20al5 Alloy Resistance Electric Heating Wire
Cr20al5 Alloy Resistance Electric Heating WireCr20al5 Alloy Resistance Electric Heating Wire3. Usage
It is mainly used in electric locomotive, diesel locomotive, metro vehicle and high speed moving car etc brake system brake resistor, electric ceramic cooktop, industrial furnace.

4. Features
Stable performance; Anti-oxidation; Corrosion resistance; High temperature stability; Excellent coil-forming ability; Uniform and beautiful surface condition without spots.

5. Packing detail
1) Coil (plastic spool) + compressed ply-wooden case + pallet
2) Coil (plastic spool) + carton + pallet

6. Products and services
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Stable properties in high temperature;
5). Fast delivery;
C P S Mn Si Cr Ni Al Fe Other
Max
0.05 0.025 0.025 0.70 Max 0.6 21.0~23.0 Max 0.60 5.0~7.0 Bal. Nb 0.5
Mechanical Properties
Max Continuous Service Temp 1350ºC
Resisivity at 20ºC 1.45 ohm mm2/m
Density 7.1 g/cm3
Thermal Conductivity 46.1 KJ/m·h·ºC
Coefficient of Thermal Expansion 16.0×10-6/ºC
Melting Point 1510ºC
Tensile Strength 637~784 Mpa
Elongation Min 12%
Section Variation Shrink Rate 65~75%
Repeatedly Bend Frequency Min 5 times
Continuous Service Time -
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic


Temperature Factor of Electrical Resistivity
20ºC 100ºC 200ºC  300ºC  400ºC  500ºC  600ºC  700ºC  800ºC  900ºC 1000ºC 1100ºC 1200ºC
1 0.997 0.996  0.994 0.991 0.990 0.990 0.990 0.990 0.990  0.990  0.990 0.990
0cr21al6nb FeCrAl Heat Resistant tapes

1. Description
With the characteristics of high resistance, low coefficient of electric resistance, High operating temperature, good corrosion resistance under high temperature, It is widely used in industrial electric furnace, household electrical appliance and Far infrared ray device.

2. Specification
Wire:
Diameter: 0.15mm-8.0mm
Strip:
Thickness: 0.6mm-3.0mm
Width: 5mm-250mm

Cr20al5 Alloy Resistance Electric Heating Wire
Cr20al5 Alloy Resistance Electric Heating WireCr20al5 Alloy Resistance Electric Heating Wire3. Usage
It is mainly used in electric locomotive, diesel locomotive, metro vehicle and high speed moving car etc brake system brake resistor, electric ceramic cooktop, industrial furnace.

4. Features
Stable performance; Anti-oxidation; Corrosion resistance; High temperature stability; Excellent coil-forming ability; Uniform and beautiful surface condition without spots.

5. Packing detail
1) Coil (plastic spool) + compressed ply-wooden case + pallet
2) Coil (plastic spool) + carton + pallet

6. Products and services
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Stable properties in high temperature;
5). Fast delivery;
C P S Mn Si Cr Ni Al Fe Other
Max
0.05 0.025 0.025 0.70 Max 0.6 21.0~23.0 Max 0.60 5.0~7.0 Bal. Nb 0.5
Mechanical Properties
Max Continuous Service Temp 1350ºC
Resisivity at 20ºC 1.45 ohm mm2/m
Density 7.1 g/cm3
Thermal Conductivity 46.1 KJ/m·h·ºC
Coefficient of Thermal Expansion 16.0×10-6/ºC
Melting Point 1510ºC
Tensile Strength 637~784 Mpa
Elongation Min 12%
Section Variation Shrink Rate 65~75%
Repeatedly Bend Frequency Min 5 times
Continuous Service Time -
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic


Temperature Factor of Electrical Resistivity
20ºC 100ºC 200ºC  300ºC  400ºC  500ºC  600ºC  700ºC  800ºC  900ºC 1000ºC 1100ºC 1200ºC
1 0.997 0.996  0.994 0.991 0.990 0.990 0.990 0.990 0.990  0.990  0.990 0.990

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification

Light Duty

Heavy Duty

Rang of the Door

Single-Leaf

Double-Leaf

Single-Leaf

Double-Leaf

Door leaf max weight

100kg

100kg x 2

200kg

200kg x 2

Mounting Method

Surface mounting or built-in mounting

Open Width

700-2000mm

650-2000mm

750-2000mm

650-2000mm

Power Supply

AC 220v ± 10%, 50-60 Hz

Opening Speed

300-500mm/s (adjustable)

Closing Speed

250-550mm/s (adjustable)

Creep speed

30-100mm/s (adjustable)

Hold-open time

0.5-20s (adjustable)

Airproof Force (Max.)

>70N

Manual Pushing Force

<100N

Electronic Lock Force

>800N

Power consumption

150W

Ambient temperature

-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com

You may also like