Respond to an estimate of consumption: Buy one at a time to avoid a slight color difference in the purchased paint. Is selected from the same brand: primer and finish matching the best selection of the same brand or paint, to prevent chemical reaction between the primer and the topcoat. Construction sequence: 1. Remove dust and dirt on the surface of wooden products and lines (wood base). 2. Trimming the burrs on the surface of the wood substrate, lifting the flaws, etc., and polishing with a sand leather to make the corners neat. 3. Use oily putty (or transparent putty) to scrape, polish, refill and putty after putty (when using varnish, first make up brown eyes, nail holes, and do local color repair work). 4. Apply the paint over the first pass, refill the putty, remove the surface dust after polishing. 5. Apply the second pass of paint, remove dust from the surface after grinding and apply water to the surface of the sand to repair the oil 6. Apply the third pass of paint until the desired result is achieved. Expert Tips: Coating Notes: 1, wall stickers: In order to prevent cracks on the wall, non-load-bearing wall must be patched. 2. Wall lining: Wall lining is an alternative product to 821 putty and is a material that must be used on the base of the wall. 3, primer: primer moisture, mold, must first brush the primer, after the brush finish. 4, color: In accordance with the building materials market, the color card to choose paint color, the best choice for the color than the color card, the actual brushing effect is what you want. 5. Spraying: The effect of spraying is better than worker's hand brush, but it is more expensive. Three trees paint paint paint coating building materials market ABS Case Measuring Tape,ABS Case TPR Cover Measuring Tape,Rubber Coated Measuring Tape HENAN BONTHE MEASURING TOOLS. CO., LTD , https://www.tapemeasureb.com
Brush paint paint paint
Buy the heaviest package: Lift the paint bucket and shake it. If there is a crackling sound, it indicates that the packaging is seriously lacking, and there are two shortages of the product. The viscosity is too low. The formal factory is real and does not hear the sound. .